How do you put a chain on a chainsaw?

Step 1: Remove the Old Chainsaw Chain.
Step 2: Release the Chain Tension.
Step 3: Remove the Old Chainsaw Chain.
Step 4: Loosen the Tensioning Screw.
Step 5: Thread the New Chain Onto the Saw.
Step 6: Align the Guide Bar.
Step 7: Replace the Side Plate.
Step 8: Tighten the Chain to the Correct Tension.

Consequently, which way does the chain go on a chainsaw?

A chainsaw always rotates its chain clockwise. No matter what the best chainsaw model is, it's always the same. That's why the sharp edges of the blade should face the clockwise direction. While watching from the top, you should notice the sharp edges facing in the opposite direction of the chainsaw body or motor.

Beside above, how tight should you tighten a chainsaw chain? A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can't pull the drive links out of the bar nose.

Secondly, can you put a chainsaw chain on wrong?

Unfortunately the chain will go on either way, but if you put it on backwards, it will not cut. Remember, when holding the chainsaw, the cutting portion of the blade should be facing away from you, traveling from the back of the chainsaw to the front tip of the chainsaw.

Why does my chainsaw chain dull so quickly?

You may be putting to steep of an angle on the cutters, which will dull quickly. You're rakers may be too far down, which will contribute to a quick dulling chain. You may be cutting dirty wood. You may be slightly touching the ground with the tip of the bar.

Are chainsaw bars and chains universal?

Contrary to popular belief, chains in chainsaws are actually not universal. While they do serve one purpose – which is to cut trees, the truth is that they differ in specifications and structure.

When should I replace chainsaw chain?

Chainsaw Chain Life Expectancy: When to Sharpen or Replace

A chainsaw chain can last for 5+ years with frequent use.
Here's what you should do to check if your chain can be safely sharpened again:
When to sharpen with a file guide: a good rule of thumb, is to give your chain a 1-2 swipes with the file guide every time you fuel up.

Why is my chainsaw smoking?

It isn't normal for a chainsaw to smoke, but if it does happen it can be the result of the chainsaw overheating, the fuel mix containing too much oil, or the chain either not being sharp enough or not getting enough lubrication. In short, a smoking chainsaw is a sure sign that something isn't right.

How do I know if my chainsaw chain is dull?

4 signs of a dull chainsaw chain

The chainsaw chain does not pull itself into the wood.
When cross cutting (against the grain of the wood) a dull chainsaw chain creates fine sawdust instead of coarse strands.
The saw is producing smoke even when your chain is oiled and the chain tension is correct.
The chainsaw produces an uneven cut.

What is the best angle to sharpen a chainsaw?

Most standard chain is sharpened at 25-35 degrees for crosscutting wood and for ripping with the grain it's best to use 10 degrees. So if you are cutting with the grain, you should be using 10 degree sharpened chain.

Do chainsaw chains stretch?

During operation, the chains of chainsaw can become loose because they stretch. This can take place in the case of normal operation as well that leads to sagging of chains on the guide bar of saw. The loop of a new chain become longer in the first use since it is used in single direction.

Why does my chainsaw chain keep coming off?

The main reason the chain jumped off in the first place is usually too loose chain tension. During use of the saw, it is normal to have to retighten the chain tension from time to time, failure of this will cause the chain to jump off.

What is the difference between chainsaw chains?

Its key differences are sharp cutting teeth on the outside of the chain loop, and flat drive links on the inside, to retain the chain on the saw's bar and allow propulsion by the engine or motor. Saw chains (and chainsaws generally) are used for cutting wood.

Why is my chainsaw leaking bar oil?

An overfilled reservoir can often leak oil when the saw is turned on. Check this and siphon some off if it looks excessively high. If the oil is running out via the delivery line to the bar then there is a chance that the tank vent is plugged up. If so, the chain may be running 'dry' during operation.

What is the best chainsaw chain?

The 10 Best Chainsaw Chains

Oregon S56 AdvanceCut Chainsaw Chain – Best Overall.
Oregon S52 AdvanceCut Chainsaw Chain.
Trilink 18″ S62 Chainsaw Chain – Best Value.
Oregon R34 AdvanceCut Chain-Saw Chain.
Oregon D72 AdvanceCut 20-Inch Chainsaw Chain.
Husqvarna 18″ Chainsaw Chain.
Husqvarna 24″ Chainsaw Replacement Chain.

How do you change a chainsaw blade?

Step 1: Remove the Old Chainsaw Chain.
Step 2: Release the Chain Tension.
Step 3: Remove the Old Chainsaw Chain.
Step 4: Loosen the Tensioning Screw.
Step 5: Thread the New Chain Onto the Saw.
Step 6: Align the Guide Bar.
Step 7: Replace the Side Plate.
Step 8: Tighten the Chain to the Correct Tension.

What size chain do I need for my Stihl chainsaw?

Stihl typically sells chains with one of three pitch measurements: 3/8-inch, . 325 inches or . 404 inches. Stihl uses a coding system that consists of a single digit or letter and that describes the chain's characteristics.

Can I put a longer bar on my Stihl chainsaw?

Can you put a longer bar on a chainsaw? The answer is yes and no. Many chainsaws are designed to take different size units. For example, the Husqvarna 460 Rancher is commonly sold with a 20 inch bar and chain.

How do I identify my Stihl chain?

How to Determine Chain Saw Chain Size for a Stihl

Locate the Marketing Number stamped on the side of the chain.
Determine the pitch of the chain, which is the distance between three rivets divided by two, by locating the first digit in the Marketing Number stamped on the side of the chain.
Find the gauge of the chain by locating the number stamped on the drive link.

What size chain goes on a Stihl ms170?

16" Chainsaw Chain fits Stihl MS170 MS180 55 Links 43 Gauge.

When should a Stihl chainsaw bar be replaced?

Stihl RecommendationsAlthough Stihl recommends you turn the chain saw chain bar over each time you sharpen or change the saw, the day will come when you need to replace the bar altogether due to wear. Before that day comes however, turning the bar regularly extends its life by causing it to wear evenly on each side.

How do you measure a chainsaw bar?

Measuring Your Chainsaw BarTo find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4" will actually have a called length of 20".